ASRock Timing Configurator
ASRock Timing Configurator is a fast and simple program that provides users with a rich set of fine-grained DRAM settings for professional tuning. You can configure CAS delay, line precharge time, RAS-Ras delay, FSB Dram and command frequency.
Setting timings ASRock Timing Configurator
1. Download and install Asrock Timing Configurator.
2. Launch the program and select your RAM from the list of available modules.
3. Carefully read each parameter and its description. Remember that incorrectly setting timings can lead to system instability or even hardware damage.
4. Click on each option and select the optimal value from the options provided. If you are not sure which value to choose, leave it at its default settings.
5. Repeat step 4 for all other parameters until you have configured all the required values.
6. After completing the settings, save the changes and reboot the system to apply the new timings.
ASRock Timing Configurator Options
Asrock timing configurator allows you to configure many parameters to optimize RAM performance and achieve the best results. Here are some of them:
- CAS Latency(CL): This parameter determines the time it takes the processor to access data in memory cells. The lower the CAS Latency value, the better the performance.
- RAS-to-CAS Delay (tRCD): Delay time between RAS and CAS operations. A lower value for this parameter also has a positive effect on performance.
- RAS Precharge Time (tRP): The time it takes memory to recover before performing a new operation. Adjusting this setting may also improve performance.
- Row Cycle Time (tRC): The time it takes memory to access a complete row. A higher value for this setting may improve performance.
Setting up ASRock Timing Configurator
Setting up the Asrock timing configurator is not difficult, but requires certain knowledge and skills. Here are step-by-step instructions that will help you set up this tool on your computer:
- Step 1: Launch the program. First, of course, you need to install Asrock timing configurator on your computer. Launch the program after installation and start setting up.
- Step 2: Select a profile. Asrock timing configurator offers several ready-made settings profiles, as well as the ability to create your own. You should choose the profile that best suits your requirements.
- Step 3: Change the settings. Asrock timing configurator offers a wide range of parameters that can be changed to suit your needs. Review each parameter carefully and determine the values that suit your goals.
- Step 4: Apply the changes. Once you have configured all the settings, you need to apply the changes. Click the “Apply” button or follow other steps specified in the program to save the settings.